Guangdong Shengwei Glass Technology Co., Ltd.

Shengwei has two electric furnace with a daily output of 50 tons, with a furance area of 10*2 square meters The furnace adopts electric way to melt liquid glass, which has the advantages of no waste gas pollution, high thermal efficiency, easy handling and energy saving.

The traditional furnace has a large amount of exhaust gas emissions, so it must to add extra complicated environmental protection equipment to ensure that the emissions meet the standards, and this cost will be huge.Traditional furnaces use flame space to melt glass, which has low thermal efficiency and some raw materials are wasted due to the volatilization of flue gas.
No. 1 furnace is equipped with two advanced SANJING(four electricity) 6 single row trains machine, which have the characteristics of high equipment precision and stable operation.It can produce 100,000 to 120,000 glass bottles per day, with a glass weight range of 80g to 300g. The production capacity is set by multiplying the production machine speed by the time (1440 minutes) according to different product weights. For example, s20007 (177g) machine speed 45 * 1440 = 64800 (gross production) * 75% pass rate = 48600 (Good product), s20039a (260g) machine speed 32 * 1440 = 46080 (gross production) * 75% pass rate = 34560 (Good product).
The no. 2 electric furnace sunrise 30 tons, equipped with 3 production lines, including a SANJING 8 single row machine, SANJING 6 single row machine 1 set and 1 Chu 4 group 9S rotary row machine. The no. 2 furnace make the workshop have two furnaces and five production lines at the same time.Line 1 will produce 180g-200g of emulsion bottles;Line 2 will produce 150g-180g of emulsion bottles;Line 3 will produce 60g-100g of skin cream and emulsion bottles;Line 4 will produce 120g-150g of skin cream and emulsion bottles;Line 5 will produce 200g to 300g of lotion and perfume bottles;Now we can produce 9 million bottles a month, which will greatly increase the flexibility of the product. In addition, the two furnaces exchange overhaul to avoid production stoppage during overhaul of single furnace.
One batch of molten glass is weighed by raw material scales of different proportions, premixed evenly, and then sent to the furnace for melting by the conveying system.The clean glass liquid is obtained by melting and clarification at 1500 ℃ in the furnace, and transported to the feeder of each production line through the feeding channel to make the droplets required for each product, Various types of glass bottles are produced in the mold by the row and column machine.

The production flow

1、Feeding and melting: Weighing and dosing——mixing——conveying——feeder——melting pool 1500 degrees——working pool2、Feeding: feeding channel —— feeding basin —— mud bowl —— cutting —— dropping 1100 degrees —— feeding pipe3. Production moulding: row and column machine —— initial mold —— turnover —— molding —— molding 550 degrees —— bottle clamping – bottle pulling —— turning machine4. Annealing: machine push the bottle into annealing furnace —— annealing furnace heating 550-580 degrees —— holding for 20 minutes —— slow cooling process (slow cooling to 430 degrees) —— quick cooling out (annealing time is generally about 1.5 hours)5. Inspection: 100% full inspection by light on —— packaging —— sampling inspection by QC —— put into the warehouse

The No.1 electric furnace production line can only produce products with the same weight. When changing the weight, it need to replace the mud bowl before making the next batch of products.When each time the mud bowl is replaced, there will be defects such as bubbles and dirty materials.

It will take about 2 hours for the liquid glass to return to normal.Therefore, the production plan is to arrange the products close to the weight section together, At the same time, the production line should also adjust the furnace discharge according to different weights to ensure that the overall furnace discharge is controlled within 1 ton.

Now the multi-weight feeding machines have been introduced to no.2 furnace. A single production line can produce products with different weights of about 10 to 15 grams at the same time, which is great help to reduce the frequency of changing production and increase the flexibility of products.

Shengwei is the second one use electric melting furnace in China for the production of cosmetic glass bottles.Under this guidance, the use of electric melting furnaces in the cosmetic glass bottle manufacturing industry is increasing.Hangzhou Samsung has also put into operation a 40 ton electric melting furnace, Nantong Xianglong, Pingxiang Gaocheng, Shanxi Xinda and other electric melting furnaces are in production, and Anhui Yijing plans to build an electric furnace.

There are also different configurations of production lines in the industry. Shengwei currently focuses on single drop models, which has great advantages in stable product production, stable functional & size and well control bottle body Hafts line.

There are two drop machines and three drop machines in the industry, which has a certain output value effect on the production of light weight bottles (35-100g) and products with large single quantity.Thanks for your attention.

 Click to find more knowledge of glass manufacture here